Subscription preference

Notification emails are sent to your Samsung account email address.

* Email : anonymous@samsung.com

  

Close

Emulator does not start

Forums View
Started by Newbie dom , 350 Seed Jan 22, 2018 15:00 Replies : 6 View : 656 Likes : 0
Trying to start one of the emulators (wearable-3.0-circle-x86) and it shows a black screen and never boots.  Trying to start the command line returns SDB is not ready, using SDB devices from the command line shows no devices attached.  Anyone know what the issue might be?  I have no problems debugging my actual device (gear fit 2 pro).
Post Reply
Board View
r.liechty , Jan 22, 2018 17:07 Post #1 0
When I was doing some examples and simple programs, I had this happen to me a couple times. I rebooted my computer and it worked right next time.  I'm not a Tizen developer so I assumed it was something I did wrong maybe one ot the experts have an answer, instead of a work around.

Ron

Post Reply
Board View
Samsung Developer s.arefin , 38030 Seed Jan 23, 2018 05:06 Post #2 0
Hi,
Did you try with GPU off from emulator configuration.
Check the image below:



Thanks.
Post Reply
Board View
Newbie dom , 350 Seed Jan 23, 2018 14:18 Post #3 0
Hi, thanks for your reply, tried turning off GPU acceleration but still no joy, this turns up in the klog

*** Setting model-config.xml
[   17.863782] sed (1244) used greatest stack depth: 5984 bytes left
Illegal instruction
Illegal instruction
- width=360, height=360
Illegal instruction
Illegal instruction
Illegal instruction
- dpi=301
/init: /new_root/etc/emulator/prerun.d/set-model-config.sh: line 109: /new_root/usr/bin/system_info_update_db: not found
/init: /new_root/etc/emulator/prerun.d/set-model-config.sh: line 109: /new_root/usr/bin/system_info_update_db: not found
Switching root...
[   18.648137] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[   18.648137] 
[   18.648484] CPU: 1 PID: 1 Comm: systemd Tainted: G S      W       4.4.35 #1
[   18.648653] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
[   18.648922]  00000000 00000046 df4c3e20 c120c9ea df4d0000 c189c098 df4c3e38 c10d39f9
[   18.649202]  c189c098 df4d0000 c189c098 df4d0000 df4c3e74 c103b51c c179bb75 00000004
[   18.649444]  df4d047c df4d0000 00000001 de7b1378 00000000 df4c3e5c df4c3e60 df4c3e60
[   18.649683] Call Trace:
[   18.649774]  [<c120c9ea>] dump_stack+0x5d/0x84
[   18.649893]  [<c10d39f9>] panic+0x86/0x1aa
[   18.650004]  [<c103b51c>] do_exit+0x436/0x85a
[   18.650410]  [<c103b9a8>] do_group_exit+0x37/0x84
[   18.650410]  [<c1043654>] get_signal+0x4b9/0x507
[   18.650410]  [<c1002114>] do_signal+0x1e/0x4c7
[   18.650410]  [<c10027f1>] ? do_trap+0x74/0x7a
[   18.650410]  [<c10028b5>] ? do_error_trap+0xae/0xb9
[   18.650410]  [<c11121d5>] ? SyS_fstatat64+0x2f/0x34
[   18.650410]  [<c10011c8>] prepare_exit_to_usermode+0x57/0x92
[   18.650410]  [<c1002dc7>] ? do_overflow+0x1a/0x1a
[   18.650410]  [<c1628c91>] resume_userspace+0xd/0x14
[   18.650410]  [<c1002dc7>] ? do_overflow+0x1a/0x1a
[   18.650410] Kernel Offset: disabled
[   18.650410] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[   18.650410] 



Post Reply
Board View
Samsung Developer s.arefin , 38030 Seed Jan 25, 2018 05:45 Post #4 0
Can you please share you environment detail.
It works on my Windows 7 64 bit.
if you use windows, you can try with installing Intel HAXM Link: developer.tizen.org/development/tizen-studio/download/installing-tizen-studio/hardware-accelerated-execution-manager
thanks.
Post Reply
Board View
Newbie alinamartin964 , 210 Seed Feb 01, 2018 06:44 Post #5 0
If your emulator does not working properly, that's usually means you are doing problem with ADT. This meaning that if you attempt to debug on device it will error out as well because of a miss-communication with ADT. Target Offers And Deals suggest uninstalling everything and reinstalling it all from scratch making sure that you install the proper drivers that are recommended as well.
Post Reply
Board View
Newbie higabyte , 210 Seed Mar 25, 2018 10:34 Post #6 0
Dears,
I have the exactly same problem but in other HW environment. My HW specs are:
H/W path            Device      Class       Description
=======================================================
                                system      To Be Filled By O.E.M. (To Be Filled By O.E.M.)
/0                              bus         PCWARE APMCP68
/0/0                            memory      64KiB BIOS
/0/3                            processor   AMD Phenom(tm) II X6 1055T Processor
/0/3/5                          memory      768KiB L1 cache
/0/3/6                          memory      3MiB L2 cache
/0/4                            memory      8GiB System Memory
/0/4/0                          memory      4GiB DIMM Synchronous 667 MHz (1,5 ns)
/0/4/1                          memory      4GiB DIMM Synchronous 667 MHz (1,5 ns)
/0/a                            memory      RAM memory
/0/1                            bridge      MCP61 LPC Bridge
/0/1.1                          bus         MCP61 SMBus
/0/1.2                          memory      RAM memory
/0/2                            bus         MCP61 USB 1.1 Controller
/0/2/1              usb2        bus         OHCI PCI host controller
/0/2/1/3                        input       Microsoft Wireless Desktop Receiver 3.1
/0/2.1                          bus         MCP61 USB 2.0 Controller
/0/2.1/1            usb1        bus         EHCI Host Controller
/0/2.1/1/7          scsi6       storage     USB2.0-CRW
/0/2.1/1/7/0.0.0    /dev/sdb    disk        Multi-Card
/0/2.1/1/7/0.0.0/0  /dev/sdb    disk        
/0/100                          bridge      MCP61 PCI bridge
/0/5                            multimedia  MCP61 High Definition Audio
/0/6                            storage     MCP61 IDE
/0/7                enp0s7      bridge      MCP61 Ethernet
/0/8                            storage     MCP61 SATA Controller
/0/8.1                          storage     MCP61 SATA Controller
/0/9                            bridge      MCP61 PCI Express bridge
/0/9/0                          display     Park [Mobility Radeon HD 5430]
/0/9/0.1                        multimedia  Cedar HDMI Audio [Radeon HD 5400/6300/7300 Series]
/0/b                            bridge      MCP61 PCI Express bridge
/0/101                          bridge      MCP61 PCI Express bridge
/0/102                          bridge      Family 10h Processor HyperTransport Configuration
/0/103                          bridge      Family 10h Processor Address Map
/0/104                          bridge      Family 10h Processor DRAM Controller
/0/105                          bridge      Family 10h Processor Miscellaneous Control
/0/106                          bridge      Family 10h Processor Link Control
/0/c                scsi2       storage     
/0/c/0.0.0          /dev/sda    disk        500GB WDC WD5000AAKX-0
/0/c/0.0.0/1        /dev/sda1   volume      465GiB Linux LVM Physical Volume partition
/0/d                scsi5       storage     
/0/d/0.0.0          /dev/cdrom  disk        DVDRAM GH22NS70
/1                  docker0     network     Ethernet interface
/2                  virbr0      network     Ethernet interface
/3                  virbr0-nic  network     Ethernet interface

I am running Ubuntu 17.10. The Emulator klog is:
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.35 (root@de6692f3d1a4) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #1 SMP PREEMPT Mon Sep 4 15:40:25 EDT 2017
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffda000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] e820: last_pfn = 0x3ffda max_arch_pfn = 0x100000
[    0.000000] Force x86 PAT
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f6a20-0x000f6a2f] mapped at [c00f6a20]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6820 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000003FFE18A9 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000003FFE1785 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000003FFE0040 001745 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000003FFE0000 000040
[    0.000000] ACPI: APIC 0x000000003FFE17F9 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000003FFE1871 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] 135MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000003ffd9fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffd9fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd9fff]
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfeffbfff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 18 pages/cpu @f6de5000 s42764 r0 d30964 u73728
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259788
[    0.000000] Kernel command line: vm_name=NUIET video=LVDS-1:720x1280-32@60 dpi=295  host_ip=10.0.2.2 console=ttyS0 sdb_port=26100, vm_resolution=720x1280
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003ffda)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 1025016K/1048032K available (6313K kernel code, 647K rwdata, 2392K rodata, 1792K init, 584K bss, 23016K reserved, 0K cma-reserved, 139120K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc1925000 - 0xc1ae5000   (1792 kB)
[    0.000000]       .data : 0xc162a869 - 0xc1923e80   (3045 kB)
[    0.000000]       .text : 0xc1000000 - 0xc162a869   (6314 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 32.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] Console: colour *CGA 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2812.756 MHz processor
[    0.020002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.51 BogoMIPS (lpj=28127560)
[    0.021583] pid_max: default: 32768 minimum: 301
[    0.022268] ACPI: Core revision 20150930
[    0.031510] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.032411] Security Framework initialized
[    0.032986] Smack:  Initializing.
[    0.033450] Smack:  Netfilter enabled.
[    0.033991] Smack:  IPv6 Netfilter enabled.
[    0.034744] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.035720] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.036837] Initializing cgroup subsys io
[    0.037399] Initializing cgroup subsys memory
[    0.037974] Initializing cgroup subsys devices
[    0.038560] Initializing cgroup subsys freezer
[    0.039244] Initializing cgroup subsys net_cls
[    0.040085] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.040809] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.047876] Freeing SMP alternatives memory: 20K (c1ae5000 - c1aea000)
[    0.048759] ftrace: allocating 33249 entries in 65 pages
[    0.060099] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.061866] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.170000] smpboot: CPU0: AMD QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    0.170000] Performance Events: AMD PMU driver.
[    0.170000] ... version:                0
[    0.170000] ... bit width:              48
[    0.170000] ... generic registers:      4
[    0.170000] ... value mask:             0000ffffffffffff
[    0.170000] ... max period:             00007fffffffffff
[    0.170000] ... fixed-purpose events:   0
[    0.170000] ... event mask:             000000000000000f
[    0.210254] x86: Booted up 1 node, 1 CPUs
[    0.212430] smpboot: Total of 1 processors activated (5625.51 BogoMIPS)
[    0.216634] Force x86 PAT
[    0.218316] devtmpfs: initialized
[    0.230197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.240300] RTC time:  2:26:05, date: 03/25/18
[    0.241796] NET: Registered protocol family 16
[    0.243645] kworker/u2:0 (27) used greatest stack depth: 7412 bytes left
[    0.270097] cpuidle: using governor ladder
[    0.300033] cpuidle: using governor menu
[    0.301405] ACPI: bus type PCI registered
[    0.302434] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.304629] PCI: PCI BIOS revision 2.10 entry at 0xfd536, last bus=0
[    0.306257] PCI: Using configuration type 1 for base access
[    0.312454] kworker/u2:1 (43) used greatest stack depth: 7164 bytes left
[    0.314432] kworker/u2:1 (46) used greatest stack depth: 7004 bytes left
[    0.380115] ACPI: Added _OSI(Module Device)
[    0.381334] ACPI: Added _OSI(Processor Device)
[    0.382561] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.383971] ACPI: Added _OSI(Processor Aggregator Device)
[    0.390290] ACPI: Interpreter enabled
[    0.391231] ACPI: (supports S0 S3 S4 S5)
[    0.391952] ACPI: Using IOAPIC for interrupt routing
[    0.392931] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.400562] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.401511] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.402531] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.403457] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.405588] acpiphp: Slot [2] registered
[    0.406119] acpiphp: Slot [3] registered
[    0.406702] acpiphp: Slot [5] registered
[    0.407391] acpiphp: Slot [6] registered
[    0.408056] acpiphp: Slot [7] registered
[    0.408623] acpiphp: Slot [8] registered
[    0.409244] acpiphp: Slot [9] registered
[    0.409823] acpiphp: Slot [10] registered
[    0.410039] acpiphp: Slot [11] registered
[    0.410656] acpiphp: Slot [12] registered
[    0.411270] acpiphp: Slot [13] registered
[    0.411919] acpiphp: Slot [14] registered
[    0.412456] acpiphp: Slot [15] registered
[    0.412984] acpiphp: Slot [16] registered
[    0.413512] acpiphp: Slot [17] registered
[    0.414047] acpiphp: Slot [18] registered
[    0.414658] acpiphp: Slot [19] registered
[    0.415339] acpiphp: Slot [20] registered
[    0.415980] acpiphp: Slot [21] registered
[    0.416532] acpiphp: Slot [22] registered
[    0.417071] acpiphp: Slot [23] registered
[    0.417658] acpiphp: Slot [24] registered
[    0.418212] acpiphp: Slot [25] registered
[    0.418742] acpiphp: Slot [26] registered
[    0.419344] acpiphp: Slot [27] registered
[    0.420221] acpiphp: Slot [28] registered
[    0.420853] acpiphp: Slot [29] registered
[    0.421440] acpiphp: Slot [30] registered
[    0.421966] acpiphp: Slot [31] registered
[    0.422475] PCI host bridge to bus 0000:00
[    0.423147] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.424081] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.424993] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.425912] pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff window]
[    0.426908] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.443621] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.444751] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.445995] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.450020] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.471760] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.473170] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.136635] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.137846] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.142380] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.143593] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.144745] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.145956] ACPI: Enabled 3 GPEs in block 00 to 0F
[    1.147246] vgaarb: setting as boot device: PCI:0000:00:04.0
[    1.148264] vgaarb: device added: PCI:0000:00:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.150090] vgaarb: loaded
[    1.150618] vgaarb: bridge control possible 0000:00:04.0
[    1.151778] SCSI subsystem initialized
[    1.152517] ACPI: bus type USB registered
[    1.153377] usbcore: registered new interface driver usbfs
[    1.154480] usbcore: registered new interface driver hub
[    1.155562] usbcore: registered new device driver usb
[    1.156594] Linux video capture interface: v2.00
[    1.157529] pps_core: LinuxPPS API ver. 1 registered
[    1.158474] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.160091] PTP clock support registered
[    1.160671] [eeprom](eep_init:624)[swapper/0:1]: init!!
[    1.161471] [INFO][maru_gpio_probe]: maru gpio device probe done.
[    1.162281] [INFO][maru_gpio_device_add]: maru_gpio_device is added.
[    1.163292] [INFO][maru_i2c_device_add]: maru_i2c_device is added.
[    1.164131] [micom-msg](micom_msg_init)[swapper/0:1]: called
[    1.164988] [micom-isp](micom_isp_init)[swapper/0:1]: called
[    1.165819] Advanced Linux Sound Architecture Driver Initialized.
[    1.166692] PCI: Using ACPI for IRQ routing
[    1.167912] NetLabel: Initializing
[    1.168383] NetLabel:  domain hash size = 128
[    1.169018] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.169692] NetLabel:  unlabeled traffic allowed by default
[    1.170159] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.171126] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.171826] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.175811] amd_nb: Cannot enumerate AMD northbridges
[    1.176677] clocksource: Switched to clocksource hpet
[    1.186962] pnp: PnP ACPI init
[    1.187940] pnp: PnP ACPI: found 5 devices
[    1.226536] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.227746] NET: Registered protocol family 2
[    1.228396] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.229335] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.230404] TCP: Hash tables configured (established 8192 bind 8192)
[    1.231226] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.231943] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.232775] NET: Registered protocol family 1
[    1.233290] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.233970] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.234677] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.269690] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    1.324439] Scanning for low memory corruption every 60 seconds
[    1.325642] futex hash table entries: 256 (order: 2, 16384 bytes)
[    1.326360] audit: initializing netlink subsys (disabled)
[    1.327026] audit: type=2000 audit(1521944765.320:1): initialized
[    1.338716] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.347210] fuse init (API version 7.23)
[    1.348617] 9p: Installing v9fs 9p2000 file system support
[    1.353383] NET: Registered protocol family 38
[    1.354672] bounce: pool size: 64 pages
[    1.355887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.367610] io scheduler noop registered (default)
[    1.370520] io scheduler deadline registered
[    1.373056] io scheduler cfq registered
[    1.375668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.378749] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.380574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.381548] ACPI: Power Button [PWRF]
[    1.417069] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[    1.453357] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    1.489451] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    1.490254] virtio-pci 0000:00:05.0: virtio_pci: leaving for legacy driver
[    1.526331] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[    1.633735] virtio-pci 0000:00:0a.0: virtio_pci: leaving for legacy driver
[    1.670776] virtio-pci 0000:00:0c.0: virtio_pci: leaving for legacy driver
[    1.707946] virtio-pci 0000:00:0d.0: virtio_pci: leaving for legacy driver
[    1.745803] virtio-pci 0000:00:0e.0: virtio_pci: leaving for legacy driver
[    1.785177] virtio-pci 0000:00:0f.0: virtio_pci: leaving for legacy driver
[    1.822687] virtio-pci 0000:00:10.0: virtio_pci: leaving for legacy driver
[    1.859202] virtio-pci 0000:00:11.0: virtio_pci: leaving for legacy driver
[    1.895505] virtio-pci 0000:00:14.0: virtio_pci: leaving for legacy driver
[    1.898654] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.923894] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.977270] Non-volatile memory driver v1.3
[    1.977863] Linux agpgart interface v0.103
[    1.978547] [drm] Initialized drm 1.1.0 20060810
[    2.016390] [TTM] Zone  kernel: Available graphics memory: 442958 kiB
[    2.017132] [TTM] Zone highmem: Available graphics memory: 512518 kiB
[    2.017873] [TTM] Initializing pool allocator
[    2.018816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.019653] [drm] No driver support for vblank timestamp query.
[    2.022362] fbcon: VIGS (fb0) is primary device
[    2.277066] Console: switching to colour frame buffer device 90x80
[    2.320090] tsc: Refined TSC clocksource calibration: 2812.916 MHz
[    2.320094] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x288bea1e156, max_idle_ns: 440795276936 ns
[    2.437699] vigs 0000:00:04.0: fb0: VIGS frame buffer device
[    2.460318] [drm] Initialized vigs 14.0.0 20121102 for 0000:00:04.0 on minor 0
[    2.480200] yagl: module loaded
[    2.721116] brd: module loaded
[    2.838114] loop: module loaded
[    2.854820]  vda: vda1 vda2
[    2.890969] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    2.893216] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    2.893987] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    2.894689] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    2.895936] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.896872] ehci-pci: EHCI PCI platform driver
[    2.897501] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.898391] ohci-pci: OHCI PCI platform driver
[    2.899124] uhci_hcd: USB Universal Host Controller Interface driver
[    2.967823] uhci_hcd 0000:00:01.2: UHCI Host Controller
[    2.969578] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[    2.971853] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c5c0
[    2.973145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    2.974962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.976811] usb usb1: Product: UHCI Host Controller
[    2.978276] usb usb1: Manufacturer: Linux 4.4.35 uhci_hcd
[    2.980161] usb usb1: SerialNumber: 0000:00:01.2
[    2.981904] hub 1-0:1.0: USB hub found
[    2.983102] hub 1-0:1.0: 2 ports detected
[    2.984883] usbcore: registered new interface driver usblp
[    2.986036] usbcore: registered new interface driver usb-storage
[    2.987061] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    2.989031] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.989837] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.003681] mousedev: PS/2 mouse device common for all mice
[    3.005414] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    3.009864] rtc_cmos 00:00: RTC can wake from S4
[    3.011034] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    3.012294] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[    3.013817] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.015350] usbcore: registered new interface driver usbhid
[    3.016149] usbhid: USB HID core driver
[    3.016983] logger: created 256K log 'log_main'
[    3.017714] logger: created 256K log 'log_events'
[    3.018515] logger: created 256K log 'log_radio'
[    3.019400] logger: created 256K log 'log_system'
[    3.020503] virtio touchscreen device is initialized
[    3.021395] emul resolution : 720x1280
[    3.021984] input: Maru Virtio Touchscreen as /devices/pci0000:00/0000:00:0a.0/virtio6/input/input4
[    3.023631] virtio touchscreen driver is probed
[    3.072625] marucam: device index is 0
[    3.091589] marucam: Maru Camera(1.0.2) device is registerd as /dev/video0
[    3.099550] marubl: MARU Virtual Backlight driver is loaded.
[    3.102173] virtio hwkey device is initialized
[    3.103663] input: Maru Virtio Hwkey as /devices/pci0000:00/0000:00:0d.0/virtio8/input/input5
[    3.105271] input hwkey device is opened
[    3.105895] virtio hwkey driver is probed
[    3.106435] maru_jack: maru_jack: init
[    3.106995] maru_jack: jack_probe
[    3.107545] maru_jack: request jack capability
[    3.108274] maru_jack: jack capability is 13[    3.108866] maru_jack: sysfs_create_file
[    3.109690] virtio-keyboard: driver is initialized.
[    3.110487] virtio-keyboard: driver is probed
[    3.111137] input: Maru VirtIO Keyboard as /devices/pci0000:00/0000:00:0f.0/virtio10/input/input6
[    3.112773] virtio-keyboard: driver is probed
[    3.113502] NFC: NFC driver initialized.
[    3.113973] NFC: nfc_probe
[    3.114458] NFC: NFC Probe completed
[    3.115297] sensors: Sensor driver initialized.
[    3.115944] sensors: Sensor probe starts
[    3.116801] sensors: sensor raw capability is 2015
[    3.117460] sensors: sensor capability is 7df
[    3.118084] sensors: maru_accel device init starts.
[    3.118775] sensors: device creation: accel.
[    3.119449] sensors: register_sensor_device ends: accel.
[    3.136265] input: accelerometer_sensor as /devices/virtual/input/input7
[    3.138492] sensors: maru_accel device init ends.
[    3.139790] sensors: maru_geo device init starts.
[    3.141031] sensors: device creation: geo.
[    3.141834] sensors: register_sensor_device ends: geo.
[    3.142901] input: geomagnetic_sensor as /devices/virtual/input/input8
[    3.144247] sensors: maru_geo device init ends.
[    3.145099] sensors: maru_gyro device init starts.
[    3.145959] sensors: device creation: gyro.
[    3.146836] sensors: register_sensor_device ends: gyro.
[    3.147917] input: gyro_sensor as /devices/virtual/input/input9
[    3.149206] sensors: maru_gyro device init ends.
[    3.150161] sensors: maru_light device init starts.
[    3.151061] sensors: device creation: light.
[    3.151905] sensors: register_sensor_device ends: light.
[    3.152926] input: light_sensor as /devices/virtual/input/input10
[    3.153795] sensors: maru_light device init ends.
[    3.154377] sensors: maru_proxi device init starts.
[    3.154977] sensors: device creation: proxi.
[    3.155555] sensors: register_sensor_device ends: proxi.
[    3.156308] input: proximity_sensor as /devices/virtual/input/input11
[    3.157323] sensors: maru_proxi device init ends.
[    3.157911] sensors: maru_haptic device init starts.
[    3.158620] input: haptic_sensor as /devices/virtual/input/input12
[    3.159499] sensors: maru_haptic device init ends.
[    3.160146] sensors: maru_pressure device init starts.
[    3.160908] sensors: device creation: pressure.
[    3.161502] sensors: register_sensor_device ends: pressure.
[    3.162253] input: pressure_sensor as /devices/virtual/input/input13
[    3.163302] sensors: maru_pressure device init ends.
[    3.179140] sensors: maru_uv device init starts.
[    3.181819] sensors: device creation: ultraviolet.
[    3.184481] sensors: register_sensor_device ends: ultraviolet.
[    3.187812] input: uv_sensor as /devices/virtual/input/input14
[    3.189344] sensors: maru_uv device init ends.
[    3.189976] sensors: maru_hrm device init starts.
[    3.190629] sensors: device creation: hrm.
[    3.191239] sensors: register_sensor_device ends: hrm.
[    3.191943] input: hrm_lib_sensor as /devices/virtual/input/input15
[    3.192928] sensors: maru_hrm device init ends.
[    3.193542] sensors: maru_pedo device init starts.
[    3.194319] input: ssp_context as /devices/virtual/input/input16
[    3.195244] sensors: maru_pedo device init ends.
[    3.195877] sensors: Sensor probe completes
[    3.196662] brillcodec: driver is initialized.
[    3.272404] brillcodec: driver is probed. driver version [3], device version [3.0]
[    3.274546] Initializing vdpram device driver ...
[    3.275845] vdpram device major num = 242 
[    3.277246] VMODEM: VMODEM driver initialized.
[    3.278862] VMODEM: vmodem is probed
[    3.281022] tizen_detent: driver is initialized
[    3.282423] virtio tablet device is initialized
[    3.284648] [INFO][maru_dummy_init]: dummy driver was initialized.
[    3.285676] [INFO]maru_security[maru_security_init]: security driver was registerd.
[    3.286919] [INFO][maru_sdp_mem_init]: sdp_mem initialized.
[    3.287739] [INFO]maru_hdmiswitch[maru_extinput_init]: MARU External Input Driver ver 0.0.1 successfully loaded.
[    3.289267] [dtv-decoder][maru_dtv_decoder_init](1286): driver is initialized.
[    3.290587] maruatv: (maruatv_init) successfully initialized
[    3.291556] marusif: (marusif_init) initialized
[    3.330160] clocksource: Switched to clocksource tsc
[    3.339577] snd_intel8x0 0000:00:0b.0: enable KVM optimization
[    3.603202] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    3.654063] snd_intel8x0 0000:00:0b.0: white list rate for 1af4:1100 is 48000
[    3.655791] oprofile: using NMI interrupt.
[    3.670406] Netfilter messages via NETLINK v0.30.
[    3.671025] nfnl_acct: registering with nfnetlink.
[    3.671588] nf_conntrack version 0.5.0 (16016 buckets, 64064 max)
[    3.672541] ctnetlink v0.93: registering with nfnetlink.
[    3.674201] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.676708] NET: Registered protocol family 10
[    3.688654] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.690275] sit: IPv6 over IPv4 tunneling driver
[    3.691887] NET: Registered protocol family 17
[    3.693158] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    3.696624] Bridge firewalling registered
[    3.697764] 9pnet: Installing 9P2000 support
[    3.712782] Key type dns_resolver registered
[    3.713451] Using IPI No-Shortcut mode
[    3.714094] registered taskstats version 1
[    3.725386]   Magic number: 10:443:410
[    3.727464] platform regulatory.0: hash matches
[    3.730149] ALSA device list:
[    3.731676]   #0: Intel 82801AA-ICH with STAC9700,83,84 at irq 11
[    3.734795]   #2: Maru Virtual Sif
[    3.737410] Freeing unused kernel memory: 1792K (c1925000 - c1ae5000)
[    3.738327] Write protecting the kernel text: 6316k
[    3.738986] Write protecting the kernel read-only data: 2396k
Preparing...
Mount image...
[    3.994686] busybox (1155) used greatest stack depth: 6620 bytes left
[    4.021594] EXT4-fs (vda1): recovery complete
[    4.023915] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.028526] busybox (1156) used greatest stack depth: 6604 bytes left
[    4.293794] EXT4-fs (vda2): recovery complete
[    4.296089] EXT4-fs (vda2): mounted filesystem with ordered data mode. Opts: (null)
Prerun...
*** Generating network proxy env
- http_proxy=
- https_proxy=
- ftp_proxy=
- socks_proxy=
- no_proxy=localhost,127.0.0.1/8,10.0.2.0/24
*** Setting model-config.xml
[    4.599866] sed (1202) used greatest stack depth: 5984 bytes left
Illegal instruction
Illegal instruction
- width=720, height=1280
Illegal instruction
Illegal instruction
Illegal instruction
- dpi=295
Switching root...
[    4.932983] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[    4.932983] 
[    4.941973] CPU: 0 PID: 1 Comm: systemd Not tainted 4.4.35 #1
[    4.941973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
[    4.941973]  00000000 00000046 f68d1e20 c120c9ea f68c8000 c189c098 f68d1e38 c10d39f9
[    4.941973]  c189c098 f68c8000 c189c098 f68c8000 f68d1e74 c103b51c c179bb75 00000004
[    4.941973]  f68c847c f68c8000 00000001 f5bb4038 00000000 f68d1e5c f68d1e60 f68d1e60
[    4.941973] Call Trace:
[    4.941973]  [<c120c9ea>] dump_stack+0x5d/0x84
[    4.941973]  [<c10d39f9>] panic+0x86/0x1aa
[    4.941973]  [<c103b51c>] do_exit+0x436/0x85a
[    4.941973]  [<c103b9a8>] do_group_exit+0x37/0x84
[    4.941973]  [<c1043654>] get_signal+0x4b9/0x507
[    4.941973]  [<c1002114>] do_signal+0x1e/0x4c7
[    4.941973]  [<c10027f1>] ? do_trap+0x74/0x7a
[    4.941973]  [<c10028b5>] ? do_error_trap+0xae/0xb9
[    4.941973]  [<c11121d5>] ? SyS_fstatat64+0x2f/0x34
[    4.941973]  [<c10011c8>] prepare_exit_to_usermode+0x57/0x92
[    4.941973]  [<c1002dc7>] ? do_overflow+0x1a/0x1a
[    4.941973]  [<c1628c91>] resume_userspace+0xd/0x14
[    4.941973]  [<c1002dc7>] ? do_overflow+0x1a/0x1a
[    4.941973] Kernel Offset: disabled
[    4.941973] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[    4.941973] 

I look all over Internet and I couldn't find a solution.
Could you give me a little help?

Thanks
Post Reply